Learn how to make earwires from scratch to save you loads when making jewelry from precious metals! Then check out more copper jewelry making tips and tricks. This post contains affiliate links.
Making your own earwires is a fantastic way to save space in your craft room and to save money when making jewelry with more expensive metals.
The raw materials when crafting with copper and silver, for example, will likely be cheaper than buying the components.
I love to make my own earwires when I’m using a material that I don’t necessarily stock. I have loads of gold and silver plated components, but I have more of a copper wire stash than anything else. So I make my own copper findings.
I’ve shared in the past how to make wire jewelry clasps as well as how to make jump rings from scratch.
Today, I’m sharing my favorite: how to make earwires. I do this a LOT because of the cool organic feel you get.
I also struggle with ‘lost earring syndrome’ when wearing hook earrings. And I never seem to have enough backs. When I make my own earwires, I often make it elongated so that it stays in better.
You can even take this a step further as I did with these DIY metal earring. And finally, the earrings you see modeled in this post were made for my tutorial on how to wrap crystals with wire – but I made sure to photograph the process of how to make earwires so that I can then share that tutorial too! You can see the other style featured in this wire wrapped pendant (minus the outer wire).
Which wire should you use for making your own earwires?
It’s very important to choose a good wire weight for making earwires from scratch.
You don’t want it too thin or it’ll be flimsy.
You don’t want it too thick or it won’t be comfortable to wear.
A good size would be 18 gauge. You can probably get away with 16 gauge wire here too. Play around with what works for you. Remember that the higher the gauge the thinner the wire. The lower the gauge the thinner it is.
What you need to make DIY earwires
18 Gauge copper wireWire CuttersNylon Jaw PliersRound nose pliers – it doesn’t have to be one with guides, but it’ll definitely help!File (or wire end rounder)Chasing hammerSteel bench blockSandbag – recommended to absorb the shock of hammeringClamp – recommended to more easily bend two at the same time
How to Make Earwires – Step by Step with Photos
1. Cut two pieces of wire about 2.5 inches long.
2. Round off the ends (or at least the end that’ll be poking into the ear).
3. Slightly bend back the end using the nylon jaw pliers so you don’t nick it. This makes it easier to angle into the ear.
4. Hold the two wires together so that the portion you bent back align. Holding them with a clamp with a flat end really helps with this step. Determine how long you want your earwire to be. Bend the two together around your round nose pliers together at that point.
5. Place your wires on your steel block, on top of your sandbag. Tap gently with the flat side of the hammer to slightly work harden it. Leave the bottom portion alone as you want it to remain workable to make your loop. Make sure it keeps its form as you harden it and flip it over to hammer the reverse if it starts curling up.
6. Using your round nose pliers, curl back a loop on your earwire to attach whatever will be dangling from it. Make its partner to match.
7. Make a pair! You’ve succesfully learned how to make earwires in a beautiful, elongated, and more practical shape. To make it less elongated, make a wider loop and make the loop much higher up.
When you’re done, open the loop a little to attach your dangle!
You’ve successfully nailed how to make ear wires from scratch!
Learn how to make earwires from scratch to save you loads when making jewelry from precious metals! Then check out more copper jewelry making tips …
In this post, I will teach you how to wrap crystals with wire. This is specifically for TOP DRILLED stones. You can learn how to …
Learn how to make jump rings from scratch for all your jewelry crafts! This post contains affiliate links. Ready to learn how to make jump …
Make your own modern wire stick earrings while learning basic wire jewelry making skills.
Learn hammered jewelry basics while crafting this simple wire heart pendant tutorial. You don’t need any previous wire wrapping skills. You might also want to …
Create your very own Wire Wrapped Ornaments with this simple Christmas craft. You can easily make this to hang on your own tree or give …
Craft your own DIY beaded Christmas trees with this very basic wire wrapping tutorial for beginners! You can turn these into ornaments, wire wrapped pendants, …
Wire wrap hoop earrings are such a simple concept with such a versatile result! In this post, I”ll be teaching you a super simple method …
Ah, the stunning sloppy wire wrap on this little emerald beauty! This wire wrapped bangle bracelet tutorial is not one of those neat, perfect, exact …
All it takes is some simple tutorials in a few different styles to teach you how to make wire bracelets. If you want to, you …
The post How to Make Earwires from Scratch appeared first on Moms and Crafters.
Learn how to make earwires from scratch to save you loads when making jewelry from precious metals! Then check out more copper jewelry making tips …
The post How to Make Earwires from Scratch appeared first on Moms and Crafters.Read MoreCrafts, Crafts for Adults, Jewelry Making Crafts, Learn a new skill, Wire WrappingJewelry Making Crafts Archives * Moms and Crafters